Natural Water Treatment Using Oxygenation

Eco Oxygen Technologies (ECO₂) makes the Speece Cone® Superoxygenation system that dissolves pure oxygen into sewers, treatment plants, lakes, reservoirs and rivers, without chemicals.

Solutions

Start with the Water You Treat

A Speece Cone installation in Columbia, Tennessee

Carter's Creek and Theta Pike Lift Stations, Columbia, TN. 1,450 lbs/day.

Sustainable Odor & Corrosion Control

Hydrogen sulfide (H₂S) leads to foul sewer odors, infrastructure damage, and hazardous conditions. Our oxygen-based solutions prevent H₂S formation, eliminating odors and corrosion without chemicals. ECO₂’s Superoxygenation System keeps wastewater aerobic by maintaining enough dissolved oxygen. Unlike chemical treatment, which needs continuous dosing and leaves byproducts, oxygen leaves no toxic residue in the water.

Related Project

Wastewater Odor Control Solutions

Primary clarifier, Anson-Madison Sanitary District, Madison, Maine.

Efficient Permit Compliance

Our technology enhances biological treatment by rapidly increasing dissolved oxygen (D.O.) and improving effluent quality in industrial and municipal wastewater.

Related Project

Wastewater Treatment Solutions

San Pablo Reservoir, California. 10,000 lbs/day.

Surface Water Restoration

Lakes and rivers face anoxia, excessive nutrients, and harmful algal blooms. Our oxygenation systems restore balance, improve water clarity, and support aquatic life. ECO₂’s oxygenation systems deliver dissolved oxygen at targeted depths, preventing anoxic conditions and limiting nutrient release from sediments. Unlike traditional aeration, which can disrupt stratification and resuspend pollutants, ECO₂’s hypolimnetic oxygenation provides precise oxygenation without mixing, for a stable and healthy ecosystem.

Related Project

Lake & River Water Quality Solutions

The Proof

Over 100 Systems Installed

Across 63 projects.

The project map loads as you reach it

See Every Project

How It Works

Three Ways to See the System

See an ECO₂ system installed at your water in the System Animation, watch ECO₂'s explainer videos, or follow the water through its system diagrams.

Two System Diagrams

Water is drawn in, oxygenated in the Speece Cone and returned with no bubbles, from a force main below ground or from the bottom of a lake.

A Speece Cone system at a sewer lift station. A pump draws wastewater up from the force main below ground into the top of the Speece Cone. An oxygen supply, a storage tank and a gas vaporizer, feeds pure oxygen to the top of the cone, where it dissolves. The water leaves the cone's rounded bottom with no bubbles and returns to the main.Sewer LiftStationOxygenStorageTankOxygen SupplyOxygen GasVaporizerPumpSpeeceCone
Fig. 1A Speece Cone system at a sewer lift station. A pump draws a side stream from the force main below ground, the cone dissolves pure oxygen from the oxygen supply into it, and the water returns to the main with no bubbles.
A Speece Cone system on a lake bottom. A pump on the cone's skid draws in water at the bottom of the lake and sends it up and over into the top of the Speece Cone. An oxygen feed line runs from oxygen storage on shore, down the bank and along the bottom, to the top of the cone, where the oxygen dissolves. The water leaves the cone's rounded bottom with no bubbles and spreads along the lake bottom.OxygenStorageOxygenFeed LinePumpSpeeceCone
Fig. 2A Speece Cone system on a lake bottom. A pump on the bottom draws in bottom water, the cone dissolves pure oxygen fed from storage on shore, and the water returns along the bottom with no bubbles.

For Engineers

Design Data for Your Specification

The Reference List

All 63 projects with the place, the application and the engineer, for the experience clause.

Papers to Cite

Engineer Resources

Four Speece Cones beside the Savannah River at the Savannah Harbor Expansion

Project Highlight

Savannah Harbor Expansion

The Georgia Ports Authority, the Army Corps of Engineers and partners studied 25 aeration technologies and chose ECO₂.

Savannah Harbor Expansion, Savannah, Georgia · 40,000 lbs/day

Contact Our Experts

Ask an ECO₂ Engineer About Your Water

Contact our experts today to explore how ECO₂’s innovative oxygenation technology can meet your water treatment needs.

  1. Talk to an Engineer

    Project description and goals discussed by client and ECO₂. Email a request for design information.

  2. Send Your Site Data

    Design data submitted to ECO₂ by client.

  3. ECO₂ Checks the Fit

    Design data evaluated by ECO₂ to determine technical fit.

  4. You Get a Design & a Quote

    System design, estimated capital and annual O&M costs submitted to client by ECO₂.

Fields marked (required) must be filled in.

Sending this form emails your details to ECO₂ so our team can reply. See our privacy policy.