Forks of the River Force Main

The Knoxville Utilities Board installed two Superoxygenation systems to prevent H₂S formation in a 6.4 mile-long sewer force main, with a total retention time of 24 hours.

At a Glance

About the Project

System
Superoxygenation
Place
Knoxville
State or country
Tennessee
Oxygen capacity
1,650 lbs/day (748 kg/day)
Installed
2006
Oxygen supply
LOX Storage Tank
Consultant
BWSC

One system is located at the beginning of the force main, and the second is located at the midpoint. Together, these systems add enough dissolved oxygen to protect the entire collection line from H₂S odors and corrosion.

Diagram

How This System Works

ECO₂'s diagram of a system on a sewer force main like this one: a pump draws a side stream from the main, the Speece Cone® dissolves pure oxygen into it, and the water returns to the main with no bubbles.

A Speece Cone system at a sewer lift station. A pump draws wastewater up from the force main below ground into the top of the Speece Cone. An oxygen supply, a storage tank and a gas vaporizer, feeds pure oxygen to the top of the cone, where it dissolves. The water leaves the cone's rounded bottom with no bubbles and returns to the main.Sewer LiftStationOxygenStorageTankOxygen SupplyOxygen GasVaporizerPumpSpeeceCone
Fig. 1A Speece Cone system at a sewer lift station. A pump draws a side stream from the force main below ground, the cone dissolves pure oxygen from the oxygen supply into it, and the water returns to the main with no bubbles.

The Next Step

Planning a Similar System?

Send your flows and the oxygen demand for a system like Forks of the River Force Main. ECO₂ sizes the cone and returns a budgetary price, and its engineers can share more data on Forks of the River Force Main for a submittal.

A stainless steel Speece Cone with its side stream pump and controls at a fenced pump station among pine trees