
Advanced Water Reuse with Oxygen That Keeps the Pressure
Raise dissolved oxygen in advanced treatment that takes plant effluent to drinking water standards, without breaking pressure or adding gas: the Speece Cone® at SWIFT.
01The Problem
Treating Effluent to Drinking Water Standards Takes Oxygen
At the Hampton Roads SWIFT Research Center in Suffolk, Virginia, advanced treatment takes plant effluent to drinking water standards. A Speece Cone raises dissolved oxygen in its biologically active carbon process without breaking the process's pressure or adding undissolved gas, and can dissolve up to 100 lbs of oxygen a day.
Why It Happens
The center treats up to 1 MGD of wastewater treatment plant effluent to drinking water standards and demonstrates safely adding that water to the Potomac Aquifer. In one of its stages, a biologically active, carbon-based advanced water treatment process, dissolved oxygen has to rise quickly.
Source: ECO₂ Project Portfolio, p. 25
02How It Works
Oxygen Added Without Breaking Pressure
SWIFT's engineering team selected the Speece Cone to raise dissolved oxygen quickly, with no undissolved gas carried into the process.
The System in Detail
The Speece Cone dissolves pure oxygen into the water under pressure, so the oxygen goes into the carbon process already dissolved and the process keeps its pressure. At SWIFT the cone can dissolve up to 100 lbs of oxygen a day, fed from a liquid oxygen tank.
Superoxygenation dissolves pure oxygen under pressure, absorbing over 90% of it, and reaches 50 to over 300 mg/L of dissolved oxygen.
Sources: ECO₂ Project Portfolio, p. 25; ECO₂, applications paper, p. 1
03The Proof
On Record: The HRSD SWIFT Research Center
The installation as ECO₂'s project portfolio gives it.
Every Result in One Table
The HRSD SWIFT Research Center in Suffolk, Virginia, from ECO₂'s project portfolio
The HRSD SWIFT Research Center in Suffolk, Virginia, from ECO₂'s project portfolio
| Item | On record |
|---|---|
| WhereECO₂ Project Portfolio, p. 25 | HRSD SWIFT Research Center, Suffolk, Virginia |
| What it treatsECO₂ Project Portfolio, p. 25 | Up to 1 MGD of wastewater treatment plant effluent, to drinking water standards |
| What it demonstratesECO₂ Project Portfolio, p. 25 | Safely adding the treated water to the Potomac Aquifer |
| Where the oxygen goesECO₂ Project Portfolio, p. 25 | The biologically active, carbon-based advanced water treatment process, without breaking pressure or adding undissolved gas |
| Oxygen capacityECO₂ Project Portfolio, p. 25 | Up to 100 lbs a day |
| Oxygen supplyECO₂ Project Portfolio, p. 25 | Liquid oxygen (LOX) tank |
| InstalledECO₂ Project Portfolio, p. 25 | 2023 |
Where ECO₂ Systems Work on This Problem
04For Engineers
Read the Papers
Questions Plant Engineers & Operators Ask
Why use a Speece Cone in advanced water treatment?
At the HRSD SWIFT Research Center, the engineering team selected it to raise dissolved oxygen quickly in the biologically active carbon process, without breaking pressure or adding undissolved gas to the process.
How much oxygen does the SWIFT system dissolve?
Up to 100 lbs of oxygen a day, from a liquid oxygen (LOX) tank, for a center that treats up to 1 MGD of plant effluent to drinking water standards.

Primary clarifier, Anson-Madison Sanitary District, Madison, Maine.
05The Next Step
Tell Us About Your Reuse Process
The flow, the dissolved oxygen it needs and the pressure it runs at are enough for a first look. ECO₂'s engineers check the data for a technical fit, then send a system design with its estimated capital and annual operating costs, and can visit your site to confirm the data.




