A Speece Cone beside two liquid oxygen storage tanks and their vaporizers

Solutions for Wastewater Odor Control, Treatment & Water Quality

Pure oxygen, dissolved where the problem starts. Pick your water and the problem you see, and its page sets out the cause, the measured results and the papers behind them.

01The Problem

Start with What You Are Seeing

ECO₂ dissolves pure oxygen into a side stream of water in a Speece Cone®, as easily as adding a liquid and with no chemical feed. In sewers it stops hydrogen sulfide forming; at treatment plants it meets dissolved oxygen limits; in lakes, reservoirs and rivers it oxygenates the bottom water without mixing it.

Stainless steel oxygenation piping and a blue valve beside a wastewater basin

Wastewater Odor Control

Sustainable odor & corrosion control

Lake Hodges, a drinking water reservoir among dry hills near San Diego, California, where an ECO₂ system oxygenates the bottom water

Lake Hodges, San Diego, California. 10,000 lbs/day. 2019.

02How It Works

One Technology for Every Water

The same Speece Cone dissolves pure oxygen into a side stream of a sewer, a plant, a lake or a river.

  1. Step 1: A Side Stream Goes to the Cone

    A pump draws a small stream from the pipe, the tank or the lake and sends it to the top of the Speece Cone.

  2. Step 2: Pure Oxygen Dissolves Inside

    Water and pure oxygen enter at the top. The cone widens, so the water slows and holds the bubbles until they dissolve.

  3. Step 3: The Water Goes Back Bubble-Free

    The oxygen-rich water rejoins the flow with no bubbles, and the oxygen goes to work where the problem starts.

A Speece Cone system at a sewer lift station. A pump draws wastewater up from the force main below ground into the top of the Speece Cone. An oxygen supply, a storage tank and a gas vaporizer, feeds pure oxygen to the top of the cone, where it dissolves. The water leaves the cone's rounded bottom with no bubbles and returns to the main.Sewer LiftStationOxygenStorageTankOxygen SupplyOxygen GasVaporizerPumpSpeeceCone
Fig. 1A Speece Cone system at a sewer lift station. A pump draws a side stream from the force main below ground, the cone dissolves pure oxygen from the oxygen supply into it, and the water returns to the main with no bubbles.
A Speece Cone system on a lake bottom. A pump on the cone's skid draws in water at the bottom of the lake and sends it up and over into the top of the Speece Cone. An oxygen feed line runs from oxygen storage on shore, down the bank and along the bottom, to the top of the cone, where the oxygen dissolves. The water leaves the cone's rounded bottom with no bubbles and spreads along the lake bottom.OxygenStorageOxygenFeed LinePumpSpeeceCone
Fig. 2A Speece Cone system on a lake bottom. A pump on the bottom draws in bottom water, the cone dissolves pure oxygen fed from storage on shore, and the water returns along the bottom with no bubbles.

05The Next Step

Get a Budgetary Price for Your Site

Send your site data through the contact form, or see a system installed first in the System Animation. ECO₂ returns a budgetary price. ECO₂'s engineers check the data for a technical fit, then send a system design with its estimated capital and annual operating costs, and can visit your site to confirm the data.

A stainless steel Speece Cone with its side stream pump and controls at a fenced pump station among pine trees