The Most Efficient Use of Carbon Dioxide Gas for pH Adjustment

An ECO₂ application note on dissolving carbon dioxide with a Speece Cone® to adjust pH after lime softening, which ECO₂ says wastes less gas than the usual methods.

Details

Publisher
ECO₂
Published
2019

Summary

A one-page application note on using the Speece Cone to dissolve carbon dioxide for pH adjustment after lime softening. Gaseous CO₂ is a simple alternative to acid, but it is often used inefficiently, wasting gas and energy or needing finished water as the carrier stream. ECO₂ states its in-pipe Speece Cone dissolves CO₂ at more than 99% efficiency with a smaller pump and no fouling.

Key Figures

Questions

Can carbon dioxide replace acid for pH adjustment after lime softening?

Yes. The note describes gaseous CO₂ as a simple and affordable alternative to acid for the pH adjustment step after settling in lime softening. (PDF page 1) (opens in a new tab)

Why is CO₂ often used inefficiently for recarbonation?

Common systems waste CO₂ gas, need too much energy, or need finished water as the carrier stream. (PDF page 1) (opens in a new tab)

How efficiently does the Speece Cone dissolve CO₂?

ECO₂ states an efficiency above 99%, with less power, a smaller pump, no fouling or clogging, and an in-pipe installation with no basin or channel. (PDF page 1) (opens in a new tab)

What gases can the Speece Cone dissolve besides oxygen?

The note lists ozone for disinfection, methane in the oil sector and carbon dioxide for pH adjustment, as well as oxygen in wastewater and polluted waterways. (PDF page 1) (opens in a new tab)

In Full

Full Text as Published

The text as its authors wrote it.
The application note's own words, as published. Its figures are the authors'; the PDF (1 page) is the original, with the figures, photos and tables drawn as images.

Pure CO₂ injection for pH adjustment, lime softening recarbonation and water stabilization

Lime softening processes for drinking water include a step for pH adjustment, after settling. Gaseous Carbon Dioxide (CO₂) is a simple and affordable alternative to acid, but it is often used inefficiently – wasting CO₂ gas, requiring too much energy, or the need to use finished water for the carrier stream.

The Speece Cone, by ECO₂, has been proven to be the most effective gas dissolution system for over 20 years. Whether the process is to dissolve oxygen in wastewater or polluted waterways, ozone for disinfection, methane in the oil sector, or carbon dioxide for pH adjustment – ECO₂ is the leader in dissolving gases.

Several technologies exist for CO₂ addition, but for the most efficient use of your CO₂ gas and power costs, ECO₂ is the solution:

  • Highest Efficiency, >99%
  • Less Power / Smaller Pump
  • Dirty Water? – OK!
  • No Fouling, No Clogging
  • Simple, Elegant Process
  • Smaller Footprint
  • Lowest Maintenance
  • Lowest Total Cost of Ownership
  • In-pipe, No Basin/Channel

How to Cite

One line to paste into a report.

The Most Efficient Use of Carbon Dioxide Gas for pH Adjustment. ECO₂, 2019. Eco Oxygen Technologies Technical Library. https://eco2tech.com/technical-library/the-most-efficient-use-of-carbon-dioxide-gas-for-ph-adjustment/

https://eco2tech.com/technical-library/the-most-efficient-use-of-carbon-dioxide-gas-for-ph-adjustment/

The Next Step

Ask an ECO₂ Engineer

Questions about this application note, or about your own water? An application engineer answers, with the figures.

Lake Hodges, a reservoir among dry hills near San Diego, California