Lake Hodges Presentation Conference NALMS 2020
Como o Speece Cone® do Lake Hodges foi projetado, alimentado a partir da margem e instalado no fundo do reservatório, em palestra de 2020 à North American Lake Management Society.
Detalhes

Resumo
O projeto do cone do Lake Hodges
Na conferência de 2020 da North American Lake Management Society, David Clidence, da ECO₂, explicou em detalhes o sistema de oxigenação do Lake Hodges, da cidade de San Diego (descrição do vídeo, em inglês). Um Speece Cone fica no fundo do reservatório, alimentado por uma bomba submersível e por oxigênio líquido a partir da margem, projetado para dissolver 10.000 libras de oxigênio no hipolímnio (8:46).
Números-chave
10.000libras de oxigênio
O que o cone do Lake Hodges foi projetado para dissolver no hipolímnio (dito aos 8:46) Fonte: O vídeo (abre em nova aba)
12ft
Diâmetro do Speece Cone do Lake Hodges (dito aos 8:42) Fonte: O vídeo (abre em nova aba)
5anos
Tempo antes do projeto em que foi feito o estudo de planejamento que escolheu a oxigenação (cerca de) Fonte: O vídeo (abre em nova aba), 6:53
Perguntas
Por que o Speece Cone do Lake Hodges foi instalado no fundo do reservatório?
No fundo, o cone ganha pressão hidrostática de graça e, assim, entrega mais oxigênio dissolvido sem mais potência na bomba. Os cones também podem ficar no nível do solo, na margem; a equipe de projeto escolheu o fundo (8:31).
Quanto oxigênio o cone do Lake Hodges foi projetado para dissolver?
David Clidence diz que ele foi projetado para dissolver 10.000 libras de oxigênio no hipolímnio (8:46).
Como a captação do Lake Hodges protege os peixes?
A tela de captação foi dimensionada para manter a velocidade da água em sua face abaixo de meio pé por segundo, a fim de evitar que peixes fiquem retidos contra a tela (9:49).
Quem projetou o sistema de oxigenação do Lake Hodges?
A Brown and Caldwell foi a projetista, com Bill Faisst e Marc Beutel, usando ensaios de demanda de oxigênio do sedimento do Hodges (9:11).
A palestra da NALMS 2020 traz resultados do Lake Hodges?
Não. O sistema ainda não gerava dados na época da palestra. Ela mostra as boias de amostragem instaladas para medir o oxigênio dissolvido e a temperatura perto do fundo e da superfície (12:22).
Como um Speece Cone dissolve oxigênio na água do reservatório?
Uma bomba submersível capta água do hipolímnio através de uma tela e a leva ao topo do cone, onde o oxigênio gasoso entra em forma de bolhas. O jato de entrada empurra para baixo as bolhas que sobem; o cone se alarga em direção ao fundo, de modo que a água desacelera até que as bolhas voltem a subir. Elas circulam até se dissolver, e a água rica em oxigênio sai pelo fundo do cone.
Por que a cidade de San Diego oxigenou o Lake Hodges?
Para melhorar a qualidade da água no Hodges e no Olivenhain Reservoir, ligado a ele, que fornecem água potável à região de San Diego, enfrentando a carga de nutrientes que causa florações excessivas de algas. A redução do mercúrio nos peixes foi um benefício que a cidade não esperava quando começou.
O projeto

Lake Hodges
Na íntegra
Mais números-chave
Mais dois, cada um com o que mede.
Do vídeo
| Número | O que mede |
|---|---|
| 10.000 libras de oxigênio | O que o cone foi projetado para dissolver no hipolímnio (“10.000 libras de oxigênio”, dito sem unidade de tempo) (O vídeo (abre em nova aba), 8:46) |
| 12 pés | Diâmetro do Speece Cone (O vídeo (abre em nova aba), 8:42) |
O relato completo
O problema, o trabalho, os resultados e quem fez.
O Lake Hodges teve problemas de qualidade da água por muito tempo
O Lake Hodges é o maior lago da cidade de San Diego, e sua água também alimenta a estação de tratamento de água potável da cidade (descrição do vídeo, em inglês). No vídeo da própria cidade, exibido na palestra, Jeff Pasek, da cidade de San Diego, diz que o reservatório tem problemas de qualidade da água há muito tempo (7:15).
A causa que ele aponta é a carga de nutrientes, que provoca florações excessivas de algas. A água importa muito além do lago: o Hodges e o Olivenhain Reservoir, ligado a ele, servem principalmente ao abastecimento de água potável da região de San Diego. Um estudo de planejamento feito cerca de 5 anos antes apontou a oxigenação com um Speece Cone como a forma mais econômica de enfrentar esses problemas (6:53). O projeto foi financiado em parte por uma subvenção estadual e em parte pela cidade.
Um cone no fundo do reservatório, alimentado a partir da margem
O sistema retira água do hipolímnio, a camada fria do fundo, por uma tela de captação. Submersível, a bomba da corrente lateral fica dentro de um tubo de bomba, de modo que pode ser içada e baixada para manutenção, e leva a água ao topo do cone (4:23).
O oxigênio gasoso entra pela lateral do cone em forma de bolhas. O jato rápido de entrada empurra para baixo as bolhas que sobem, e o cone se alarga em direção ao fundo, de modo que a água desacelera até que as bolhas voltem a subir. Elas circulam até se dissolver, e a água rica em oxigênio sai pelo fundo do cone, por um difusor curto, para o reservatório (3:13).
O cone é aparafusado a uma base de concreto sobre um leito de pedra. Um tanque de oxigênio líquido fica em terra, e um umbilical que vem da margem leva tanto a linha de oxigênio quanto a energia da bomba (4:51).
A equipe de projeto preferiu o fundo do reservatório a um local na margem. No fundo, o cone ganha pressão hidrostática de graça e, assim, libera água com mais oxigênio dissolvido sem mais potência na bomba (8:31).
Construído a partir de uma balsa e pronto para o monitoramento
A palestra mostra a construção. O cone é içado do caminhão de entrega para uma balsa, ao lado de sacos de pedra britada para a fundação no fundo do reservatório, e um vídeo da cidade mostra o cone sendo submerso até o seu lugar (10:56).
A tela de captação foi dimensionada para que a água atravesse sua face a menos de meio pé por segundo, a fim de evitar que peixes fiquem retidos contra a tela. O cone em si tem 12 pés de diâmetro e foi projetado para dissolver 10.000 libras de oxigênio no hipolímnio (8:46).
Para os testes de desempenho, o sistema inclui boias de amostragem que medem o oxigênio dissolvido, a temperatura e outros parâmetros perto do fundo e perto da superfície. Na época da palestra, o sistema ainda não gerava dados, por isso a apresentação não traz nenhum (12:45).
A cidade de San Diego, a Brown and Caldwell e a ECO₂
A cidade de San Diego opera o Hodges Reservoir com a County Water Authority. A Brown and Caldwell foi a projetista, com Bill Faisst e Marc Beutel, e a demanda de oxigênio do sedimento medida em ensaios no Hodges entrou no projeto final (9:11).
Paul Gantzer, da Gantzer Water, projetou e forneceu as boias de amostragem. David Clidence, presidente da ECO₂, fez a palestra; Jeff Pasek fala pela cidade no vídeo dela.
O que a palestra mostra ao proprietário de um reservatório
Se os nutrientes alimentam algas em um reservatório de abastecimento de água, o Lake Hodges mostra o caminho de uma companhia de abastecimento, de um estudo de planejamento e de ensaios de demanda de oxigênio do sedimento até um projeto funcional. As escolhas são práticas: um cone no fundo para aproveitar a profundidade como pressão, uma bomba que pode ser içada para manutenção, uma tela dimensionada para os peixes e oxigênio armazenado em terra.
A transcrição completa abaixo acompanha cada etapa, e o vídeo da própria cidade, Lake Hodges Oxygenation System, está na Biblioteca.
Texto elaborado a partir de vídeo. Cada número está como os participantes do vídeo o informam ou como a descrição no YouTube o apresenta, com o momento de onde vem; as palavras dos próprios participantes aparecem apenas entre aspas.
Transcrição
Cada palavra do vídeo, preparada para leitura.
Lake Hodges oxygenation project: NALMS 2020
A transcript of the video, edited from its YouTube captions for reading. Presented by David Clidence of ECO₂ at the North American Lake Management Society's 2020 conference; uploaded November 2020.
Introduction
David Clidence, ECO₂: Hello, my name is David Clidence, president of Eco Oxygen Technologies. Thank you, NALMS, for having me. I'm here to present on a project we did with the City of San Diego in Lake Hodges, California, involving the installation of a Speece Cone in the hypolimnion of Lake Hodges.
Very quick presentation outline. We'll speak on ECO₂, our company; get into the Speece Cone, how it's designed; Lake Hodges specific project design components; some results; and conclusion.
Company profile
Company profile. ECO₂, or Eco Oxygen Technologies, is headquartered in Indianapolis, Indiana, founded in the year 2000 to commercialize the Speece Cone that Dr. Richard Speece developed in the mid-'90s to add oxygen to lakes and rivers for water quality enhancement. We have now partnered with Dr. Speece, who sits on our board of directors and is active in the day-to-day business of the company, to enhance this technology and further this technology to both the water quality markets and the wastewater markets. The other gentleman there pictured is Dr. George Tchobanoglous, professor at UC Davis, who also helps advise us and sits on our board of directors.
ECO₂, or Eco Oxygen Technologies, is a US-based company in Indianapolis, Indiana. Most of our installations are in the United States, although we have a few in Canada and in China and Southeast Asia. Longest operating system is over 20 years. About 100 installations to date, and some pretty notable clients: Army Corps of Engineers, City of New York, Dallas, Hong Kong and others. This particular project, Lake Hodges, is in San Diego, California, and you can see there we have quite a few installations there in Southern California.
How the Speece Cone works
The subject of this presentation is centered around the Speece Cone, shown here. This installation was actually at a wastewater treatment plant, on a primary clarifier. You can see the intake piping connected to the top of the cone, the Speece Cone itself, and then the discharge piping connected from the bottom of the Speece Cone.
So, the quick technology overview of the Speece Cone. We are pulling water out of the hypolimnion, running it through a raw water screen, up through a side stream pump, which is a submersible pump, and that raw water then is fed to the top of the cone. Gaseous oxygen is piped into the side of the cone, and that oxygen gas comes in in bubble form. So once the bubble enters the cone, it has a buoyant velocity, or rise velocity, so that bubble starts rising towards the top of the cone, where the inlet water jet, which is high velocity, pushes those bubbles back down inside the cone. So the bubbles travel to the bottom of the cone, where it reaches the point. And the whole reason that the system is cone shaped is that at the bottom of the cone the cross-section of the cone is widened, where we're slowing down the water velocity to a point where the bubble rise velocity is higher than the water velocity at that point. So the bubbles then start to rise again, where they rise up to the inlet jet and are pushed back down into the cone. They're in the circular pattern until they completely dissolve. Once they're dissolved, then that oxygen in the water is discharged out the bottom of the cone, back down into the hypolimnion.
The system at Lake Hodges
So schematically, what the system looks like in Lake Hodges is the cone sits on the bottom of the reservoir. It sits on a concrete pad that's formed on a base of stone, to support the concrete pad and the cone. We have an intake screen and intake piping for the side stream pump. The side stream pump actually sits inside of a pump tube that can be easily raised and lowered for maintenance. That pump tube then is connected to the top of the Speece Cone, to feed the raw water into the top of the cone. We have an oxygen line that feeds the cone. There's a liquid oxygen tank that sits on grade, on shore, and there's what we call an umbilical cord that's running from shore that contains both the oxygen line and the pump feed power to the system. So then you have the Speece Cone itself, that's bolted to the concrete pad, and then you have a short diffuser to distribute that oxygenated water to the reservoir.
So here's what the system looks like in real life. You can see the system sitting on the concrete pad. This is on the barge before it is installed, but you have the intake screen there to your left, you have the pump and the pump tube that's connected to the cone with intake piping, you can see the Speece Cone itself, and then the diffuser port. The diffuser is not attached to the cone in this picture, but it'll be bolted to that flange on the discharge of the cone.
On the next slide I'm going to show you a YouTube video put on by the City of San Diego and Jeff Pasek, describing the background of the project, some of the particulars of the project, why they did the project, and some of the benefits. It's much better hearing from Jeff than it is for me. Hope you enjoy the video.
The City of San Diego's video
Jeff Pasek, City of San Diego: This is the Hodges oxygenation project. We're here at Hodges Reservoir, which is operated by the City of San Diego along with the County Water Authority. We are building a Speece Cone, and that's a fairly unique method for adding oxygen to a reservoir. There's only a few of them in the world. There's one in Northern California; there's another in a reservoir in Colorado. And this project derived from a planning study that was done about five years ago, which identified oxygenation using a Speece Cone as being the most cost-effective way of addressing the water quality problems in Hodges.
The oxygenation project is intended to put a lot of highly oxygenated water deep into the reservoir, at the bottom of the reservoir, to overcome water quality problems that have been here at Hodges for a long time. The project was funded in part by a state grant and also with money from the City of San Diego.
The benefits of the project are that it will improve water quality in Hodges and connected Olivenhain Reservoir, and those reservoirs are primarily for drinking water supply for the San Diego region. It will improve water quality by addressing nutrient loading that causes excessive algae blooms in the reservoir. An ancillary benefit, not anticipated when we got started on the project, is to address the accumulation of mercury in fish, which can be harmful to people and wildlife that eat the fish from the reservoir.
System design
David Clidence: So we're talking now about the system design. The Speece Cone was installed underwater. Sometimes they are installed on grade, on the shoreline. In this case the design team thought it was optimal to place the cone on the bottom of the reservoir. By doing that, you get free hydrostatic pressure on top of the cone, so you're able to increase the dissolved oxygen concentration coming out of the cone without increased horsepower. So there's many advantages to setting the cone on the bottom of the reservoir.
It's 12 ft diameter, 20 foot tall. It was designed to dissolve 10,000 pounds of oxygen into the hypolimnion. It's installed at 55 foot of depth. And an intake screen was designed so that no more than half a foot per second water velocity across the screens, to prevent fish impacting.
Brown and Caldwell was the design engineer on the project. Bill Faisst and Marc Beutel helped in this effort. You can see a picture of Marc, some of the other members that helped with the sediment oxygen demand testing of Hodges that was used in the ultimate design of the oxygenation system.
The components
Again, here's the schematic of the system. In the next few slides I'll go through specific pictures of each component of the system.
Here's a picture of the intake screen. Again, this intake screen was sized to limit the water velocity across the face of the screen to less than a half foot per second, to prevent fish impingement.
Here's the Flygt submersible pump. So there's a picture of the pump to your left, and then the pump tube to your right that the submersible pump sits down in.
Here's a picture of the liquid oxygen system and vaporizers, and then the PLC controls there to your right.
Installation
Here's a picture of the Speece Cone being lifted off the bed of the delivery truck and onto the deck of the barge.
So here you can see a picture of the barge. To the left there's the crane; you have the Speece Cone on the right-hand side. What's in front of you there, in those white bags, is actually the aggregate stone that they are going to use to build up the foundation on the bottom of the reservoir, that they would ultimately set the Speece Cone and the concrete pad on.
Here's another video from the City of San Diego, of the installation and sinking of the Speece Cone.
[The City's installation video plays with music and no speech.]
Performance testing
In terms of performance testing, the system included some sampling buoys designed and provided by Paul Gantzer of Gantzer Water. These buoys were incorporated to measure dissolved oxygen, temperature and some other parameters, near the bottom in the hypolimnion as well as near the surface.
Unfortunately, the project has not been up and running [inaudible] data by this presentation. Unfortunately, it's not available. So here's [inaudible].
Close
That sums up my presentation. Thank you for listening. If you have any questions, I'll be available during the speaker panel, but below is my email and website if you want to reach out to me directly. Thank you.
Como citar
Uma linha para colar em um relatório.
Lake Hodges Presentation Conference NALMS 2020. ECO₂, November 2020. Project engineer: Brown and Caldwell. Eco Oxygen Technologies Technical Library. https://eco2tech.com/technical-library/lake-hodges-presentation-conference-nalms-2020/
https://eco2tech.com/technical-library/lake-hodges-presentation-conference-nalms-2020/
O próximo passo
Pergunte a um engenheiro da ECO₂
Dúvidas sobre este vídeo ou sobre a sua água? Um engenheiro de aplicações responde, com os números.
